Samsung OFFICESERV 7100 - Page 458

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 SEPTEMBER 2008
MMC: 841
No Option Description Default
DATA CARD IPC YES (NOT USED IN US) YES
ITP RING VOLUME LEVEL 1-8 1
MAX COUNT 0 14 SIP STACK ALLOW
SOFTP USED 0
SOFTP ALLOW 0 15 ITP MAX LIMIT
SOFTP USED 0
M-FRAME: 40 MSEC 16 WIP DSP PARA
ECHOCNCL: ENABLE
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 841.
Display shows the first available option.
ITP RESIGTRATION
ENABLE /ITP PSWD
2. Press UP or DOWN key to select an option
OR press RIGHT soft key to move cursor.
ITP REGIST PSWD
4321
3. Press UP or DOWN key to select an option
and press RIGHT soft key to enter data and
ITP REGIST PSWD
8228
move cursor to the Step 1 position.
4. Press UP or DOWN key to select an option
OR press RIGHT soft key to move
ITP REGIST PSWD
8228
cursor.
Press UP or DOWN key to select an option
and press RIGHT soft key to store entry and
EASYSET PASSWORD
1234
move cursor
OR
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
Home Page
Table of Contents