Samsung OFFICESERV 7100 - Page 457

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 SEPTEMBER 2008
MMC: 841
No Option Description Default
6 ITP TX GAIN/HSET Sets IP-based phone Handset TX gain value of each level. -
7 ITP RX GAIN/HSET Sets IP-based phone Handset RX gain value of each level. -
8 ITP TX GAIN/MIC Sets IP-based phone MIC gain value of each level. -
9 ITP RX GAIN/SPKR Sets IP-based phone SPKR gain value of each level. -
Sets IP-based phone software upgrade option with the
system. Used for automatic software upgrades.
-
0 TYPE: Sets IP-based phone software upgrade type..
a) MMC COMMAND: IP-based phone software upgraded
manually in MMC 840.
b) PHONE CON: IP-based phone software upgraded
automatically at phone connection.
c) AUTO TIME: IP-based phone software upgraded
automatically at set time.
MMC
COMMAND
1 START TIME: IP-based phone software automatic upgrade
start time.
0000.
(Disable)
10 ITP VERS
UPGRADE
(“PHONE TFTP IP”
and “PHONE
VERSION” must be
set).
2 INTERVAL: IP-based phone software automatic upgrade
interval time.
10 seconds.
11 MGI ALIVE PERIOD Time interval between heart beat check between MGI and
MCP.
-
12 LICENSE KEY Soft phone and SIP Stack license key NONE
SOFTP ALLOW 0
SOFTP USED 0
SOFTP CONN 0
NEWS ALLOW (not supported in US) NONE
NSIP-S MAX 0
NSIP-S USED 0
NSIP-S CONN 0
SSIP-S MAX 0
SSIP-S USED 0
SSIP-S CONN 0
SIP STACK 0
H.3223 STACK 0
13 LICENSE STATUS
Home Page
Table of Contents