OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 7 APRIL 2007
7.3.66
GENERAL SCREEN:
Field Name Description
VMS Group The tenant group this mailbox is a part of
Label Name The name of this mailbox
Number The mailbox number for this block
Extension The extension number for this mailbox, if any
MClass The MClass block that governs this mailbox
Language The language to use when a subscriber logs in to this mailbox
Announce only mailbox Sets whether or not this mailbox can accept voicemail
messages
Send broadcast MSG
allowed
Allows this mailbox to send broadcast messages. Broadcast
messages are sent to every subscriber in the system.
Use LIFO message
ordering
Determines if messages are played back in chronological (First
In, First Out or FIFO) or reverse chronological (Last In, First Out
or LIFO) order
New message beep(s) When enabled, the voicemail will beep before requesting the
subscriber password to allow the user to quickly know from a
remote location if they have new messages or not. One beep
signifies one message, two beeps signifies 2 or more
messages.
To Next Page
