[SDPL]
410
SOP Emulation
Set the SOP emulation.
Compatible Mode
Set the compatible mode for SDPL.
Right-to-Left print
Set the Right-to-Left printing function.
Receive TimeOut
Set a period of time the product stays in binary data receiving mode.
Blank Item Feed
Set whether to feed a label with nothing printed on it when the product receives label formatting
commands that do not generate any printable image.
Prioritize
Select the settings to be prioritized for the SDPL command.
Format Attribute
Set the format attribute.
Pause Mode
Enable or disable the pause mode.
1 Byte Codepage
Select the code page to be used for one-byte characters.
SDPL Measure Unit
Set the measurement unit.
Scalable Font Style
Set the style of the scalable fonts.
Feedback Character
Enable or disable the <STX>a command.
SOH Commands
Set the SOH commands.
Select where to save the product settings.
• [Format Attribute], [Pause Mode], [1 Byte Codepage], [SDPL Measure Unit], [Scalable
Font Style], [Feedback Character], [SOH Commands] and [Module Selection] are
available only if [Settings] is selected for the corresponding setting item under the
[Prioritize] menu.
To Next Page
Loading...
