Siemens HiPath 1120 - Battery Interconnect Cables (BBU); Figure 3-53 Battery Interconnect Cables (BBU); Table 3-46 Technical Data of the Balun; Table 3-47 Technical Data of the Battery Interconnect Cable

Modules
3-122 Service Manual
Interconnect cables
Table 3-46 Technical data of the balun.
3.12.6 Battery interconnect cables (BBU)
Battery to PSU interconnect cables
These cables are used to link the batteries to the power supply of the HiPath1150/1190/1190R
(see Chapter 4.8, “Installing the power supply” on page 4-163).
Figure 3-53 Battery interconnect cables (BBU)
Technical data on interconnect cable with the batteries
This protects against power surges.
Table 3-47 Technical data of the battery interconnect cable
Tolerance temperature 32 to 122ºF
Transmission line ITU CTR -12 G.703
Tolerance humidity 5 to 95%
Fuse of the interconnect cable 7.5A (uniVAL - manufactured by MTA)
Length of the interconnect cable 16.4 feet
Speed up to 2,048 Mbps
Vshare cable
HiPath 1190
Interconnect cable between
the PSU’s in the HiPath 1190
Interconnect cable
PSU - Interconnect cable
Interconnect cable with
the batteries
Serial interconnect cable
between batteries
with batteries
Battery connection kit
L30251-U600-A617
+