Operation
7-322 Service Manual
Driver Installation
Figure 7-43 Windows SE - MSN Number
10. The installation of the USB drivers is now complete. CAPI applications installation will now
start automatically (see “CAPI Application setup” on page 7-331).
Windows 2000
Proceed as follows:
1. Connect the HiPath 1100 system to the computer
2. The Found New Hardware Wizard window appears so that new drivers can be installed.
Click "Next" to proceed.
3. Select the "Search for the best driver for your device" option and click "Next."
You must have administrator’s access privileges to install any software
To Next Page
Loading...
