Siemens HiPath 1120 - Figure 7-60 Configuring the ADSL Via Web Browser; SLIMC, SADSLIM, LIMC and ADSLIM Modules

Service Manual
7-339
Operation
HiPath 1100 applications
4. Hit “Enter”. If the module has the correct version of SW, the message “© Siemens Ltda /
euroset Line ADSL Router - Software Version 8 1r110k / Login” will appear. After this
procedure is complete, close this window.
7.4.4.2 SLIMC, SADSLIM, LIMC and ADSLIM modules
General Information:
– TCP/IP protocol
– Default IP: 192.168.254.253
Configuration
The system is configured using a web interface, which can be accessed via any web browser
such as Internet Explorer.
Figure 7-60 Configuring the ADSL via web Browser
The web interface is the Siemens Administrative Console and is accessed using the default
address http://192.168.254.253 on the web browser. The first screen will give the version of the
Firmware (for example: WX700018) and the MAC address of the module.