Siemens HiPath 1120 - Connections to the Systems MDF; Figure 4-39 Distribution of Extensions on the Hipath 1120 MDF; Hipath 1120

Installation
4-170 Service Manual
Connections to the system’s MDF
4.9 Connections to the system’s MDF
Introduction
Attach cables to the system’s Main Distribution Frame and route them through the conduits and
openings to reach the carrier’s main telephone distribution cabinet. Below are some examples
of configurations.
4.9.1 HiPath 1120
Example
Figure 4-39 Distribution of extensions on the HiPath 1120 MDF
.
Warning
When using the RSA version, extension lines with a C/D interface must only be in-
stalled indoors. Only regular extensions (without a C/D interface) can be installed
outdoors.
*The installation of a KS type system telephone requires a CD pair in conjunction with an A/B extension slot (see
“Installing telephone terminals” on page 4-186).
!