EasyManua.ls Logo

Siemens HiPath 1120 - Table 3-20 TME1 Module Display Readings (cas Access)

Siemens HiPath 1120
389 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Manual
3-75
Modules
Expansion modules (EB)
Segment Display Readings (H801) (E1 CAS access)
Table 3-20 TME1 module display readings (CAS access)
Display Reading Meaning
8
Continuous The module is powered.
]
Continuous Starting TME1 module.
E
Continuous
Waits 10 seconds for a command from the software (E1
Trunk Manager). If it receives no command after the specified
time, the system resumes its usual operation.
8
Continuous Transferring memory contents to DRAM memory.
Continuous Checking and validating contents of Flash memory.
P
Continuous TME1 module is active but CAS link is out of service.
A
Continuous TME1 module is active with CAS link.
I
Continuous
“Unpacking” E1 Trunk Manager.
3
Continuous
7
Continuous Writing software to Flash memory.
F
Continuous Checking transferred data.
o
Continuous E1 and CAS links are down. The reason is unknown.
Cycle - Live Clearing Flash memory.
f e
Alternating Flash memory cleared.
h
Continuous
No software in Flash memory. Waiting for tool to download
software
A.
Continuous
The local interface is taking the clock as reference from this
link.
3

Table of Contents

Other manuals for Siemens HiPath 1120

Related product manuals