Siemens HiPath 1120 - Figure 7-45 Windows 2000 - Driver Location; Figure 7-46 Windows 2000 - Driver Location

Operation
7-324 Service Manual
Driver Installation
4. If it is not already selected, check the "Specify a location" box, then click "Next."
Figure 7-45 Windows 2000 - Driver location
5. A second window will open. Under Browse, select the directory where the decompressed
driver is stored. Drivers can be found in the \Software\USB Drivers folder of the CD. The
drive is decompressed in C:\Temp (Default). If Admin is selected, use
C:TempoptiPoint_Adm_Drivers_039 directory. If Admin + CAPI is selected, use
CTempoptiPoint_AdmCAPI_ Drivers_039. Select a folder and click "Next"
Figure 7-46 Windows 2000 - Driver location
6. A message will appear indicating that a driver has been found. Click "Next" to proceed.
7. A message will appear to the effect that the software to be installed does not have a
Microsoft digital signature. Acknowledge the message by clicking "OK."