Siemens HiPath 1120 - Figure 7-6 Commserver Properties - Optipoint Connection Configuration; Figure 7-7 Commserver Properties - Optipoint CAPI Configuration

Service Manual
7-289
Operation
System programming mode using a PC
a) Connections via optiPoint VCOM:
Figure 7-6 CommServer Properties - optiPoint Connection Configuration .
b) Connections via optiPoint CAPI:
● Connection Type: ISDN Connection
● Phone #: 800
● Your MSN: --- (There is no need fill this in)
Figure 7-7 CommServer Properties - optiPoint CAPI Configuration.