Modules
3-80 Service Manual
Optional modules (MO)
3.6 Optional modules (MO)
3.6.1 LAN interface modules
Introduction
These provide a LAN Ethernet interface via their RJ45 Connectors that allow direct PC
connections to HiPath 1100 within the network and if you have an ADSL modem available, they
can share ADSL access, dispensing with the need for an external ADSL modem or HUB.
The HiPath 1100 can interact via the LAN network with the applications used in your
administration, such as: HiPath 1100 Manager, SNMP services, Interaction Center Smart,
Raters, etc.
The modules have been developed for use on the HiPath 1100 based on ADSL (Asymmetric
Digital Subscriber Line) technology. It is therefore possible to receive high-speed data and voice
(up to 8 Mbit/s) through a single pair on a standard telephone line (POTS).
Figure 3-23 Functions via LAN network.
HiPath 1100
Products and applications, such asHiPath
1100 Manager , SNMP, etc.
Service Center
Service PC with
HiPath 1100 Manager
Modem
LIM
LAN
of the cli-
ent
PSTN
(
analog or
digital network)
PSTN In-
terface
To Next Page
Loading...
