Siemens HiPath 1120 - Page 79

Service Manual
3-79
Modules
Expansion modules (EB)
U
P0/E
module Connector assignments
Table 3-23 U
P0/E
module Connector assignments HiPath1150/1190/1190R
Note: U
P0/E
modules for HiPath 1150/1190/8 may have 8, 4 or 2 ports.
3.5.5.2 CTR-U
P0/E
module
IHiPath 1120/1150/1190/1190R
Interfaces
Figure 3-22 CTR-U
P0/E
module HiPath 1120/1150/1190/1190R
X1 Connector X2
port
X3
port
backplane a1 - port 1 a5 - port 5
b1 - port 1 b5 - port 5
a2 - port 2 a6 - port 6
b2 - port 2 b6 - port 6
a3 - port 3 a7 - port 7
b3 - port 3 b7 - port 7
a4 - port 4 a8 - port 8
b4 - port 4 b8 - port 8