Service Manual
6-207
Configuring the system specifically for the client
Table of the System’s Programming Codes
6.2 Table of the System’s Programming Codes
Table 6-4 Classification of programming tables
For information on the programming of each feature see “Comments about the system’s
programming codes” on page 6-234
Item Programming
1. Main Configurations page 7-208
2. External line settings page 7-210
3. Programming an Extension page 7-212
4. DISA page 7-218
5. General settings page 7-218
6. Updating the Software page 7-222
7. Remote Administration page 7-222
8. Internal entrance telephone page 7-223
9. Call Detail Report Manager page 7-223
10. Fax/DID Feature page 7-226
11. EVM module page 7-228
12. Digital trunk settings page 7-230
13. LAN interface modules page 7-232
14. Relay and sensor on the HiPath 1120 page 7-233
To Next Page
Loading...
