Siemens HiPath 1120 - Figure 3-2 Hipath 1120 Baby Board VCC Module; Table 3-5 Baby Board VCC Module Connectors Hipath 1120

Modules
3-54 Service Manual
Motherboard (MB)
Baby Board VCC module interface
This module is connected on the MB and is an AC/DC converter used in HiPath 1120 V6.0 and
V7.0. Input voltages are 23V AC and the ring voltage, which depends on the country. Output
voltages are: 3.3VDC, 5 VDC, 24VDC, 32VDC and the ring voltage added to the offset voltage.
Figure 3-2 HiPath 1120 Baby Board VCC module
Baby Board VCC module Connector assignments
Table 3-5 Baby Board VCC module Connectors HiPath 1120
X1 and X2 Connectors
Connects to MB through a pin Connector