Service Manual
6-231
Configuring the system specifically for the client
Table of the System’s Programming Codes
Table 6-20 Digital trunk settings0
Busy signal
**
004 Position: 001 to 140
+
1 - Day
2 - Night
Busy signaling group: 001
to 140
# instead of
the code
None
Local area code
filter
011 Enter the local area code
(up to 10 digits)
# instead of
the code
None
Country code filter 012 See
Table 6-21 on page 6-232
Enter the country code (up
to 10 digits)
# instead of
the code
55 - Brazil
Call deflection 229
∗ - to enable
# - to disable
Automatic # - to disable
ISDN Layer 1 101 01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP only
or PMP or PMP)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
∗ - to enable
# - to disable
Automatic Depending
on the coun-
try
ISDN Layer 2 102 01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP only
or PMP or PMP)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
∗ - to enable
# - to disable
Automatic Depending
on the coun-
try
B channel 103 01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP or
PMP only)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
∗ - Master
# - Slave
Automatic Depending
on the coun-
try
"No DIV.LEG info"
for ISDN line
249 01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 PP or
PMP only)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
∗ - to enable
# - to disable
Automatic Depending
on the coun-
try
* For E1 digital lines select PP connection.
** This feature is valid only for digital lines with an attendant number. It is not valid if more than one extension is configured
for the slot/DID number/MSN. If the Fax/DID module is installed and configured for digital lines, this feature will also be
invalid.
For further details on how to install S
0
MOs see “System expansion limitations” on page 2-30.
Country CAC Country CAC
South Africa 27 Latvia 371
Argentina 54 Lithuania 370
Australia 61 Malaysia 60
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
To Next Page
Loading...
Need help?
General