Service Manual
7-363
Operation
HiPath 1100 applications
7.4.7 S2M Maintenance
The S2M Maintenance is an administrative program for configuring a TME1 module with S2
access.
Hardware Requirements:
– Serial interface communications (COM port).
General Information:
With the S2M Maintenance you can do the following:
● Download software
● Remove traces
● Select the software’s type of connection to the module (local or via modem)
● Select a COM port
For further details on how to configure a TME1 module with E1 CAS access refer to the
program’s “Help” system.
7.4.8 Account Manager (CDR)
Billing Data Software
To launch the Account Manager select:
Start/Programs/HiPath 1100/Call Detail Recording
7.4.9 Status Monitor indicator
Status Monitor Indicator on the computer.
To start a Status Monitor Indicator, select:
Start/Programs/HiPath 1100/StatusMonitor
If the module does not initialize, check its status on the 7-segment display (see
“TME1 module” on page 3-69).
Availability of the HiPath 1100 Manager, HiPath 1100 ADSL Manager, E1 Trunk
Manager e S2M Maintenance administration software is subject to the client’s
completion of the technical course for users of the equipment.
To Next Page
Loading...
