System Data
2-38 Service Manual
Technical Data
2.6 Technical Data
Element HiPath 1120 HiPath 1150 HiPath 1190
Standard Cabinet Size
Length 360 mm (14.17") 470 mm
(18.50")
420 mm
(16.53")
Depth 288 mm (11.33") 14.17" (370
mm)
394 mm
(15.51")
Height 64.4 mm (2.53") 100 mm (3.93") 498 mm
(19.60")
Weight 1.2 kg (2.64 lb) 4.25 kg (2.64
lb)
22.5 kg (49.60
lb)
Electrical specifications for power supply units (PSUs)
Power Requirements (Input) 220V / 127mA
127V / 331mA
110V / 381mA
110 - 230V, Full range / 1.5A
Operating Frequency 50/60Hz 50/60Hz
Rated Voltage (Output) U1: 8 Vrms
U2: 23 Vrms
5.1 VDC .
26.4 VDC .
Call Voltage U3:
40 V
rms
/60Hz
65 V
rms
/25Hz (SPA)
42 V
rms
/25Hz (RSA)
50 V
AC
+ 97 V
DC
/ 0.13A - 25Hz
42 V
AC
+ 85.8 V
DC
/ 0.13A - 25Hz
(RSA)
Dialing modes for calls to other public or private exchanges:
● MF Transmission Level:
Lower Group* -11 dBm
Higher Group
* -9 dBm
Pre-Emphasis 2 dB
Pulse Duration** 90ms min.
Inter-digit pause** 90ms min.
● DP (Dial Pulse):
Pulse/Pause Ratio** 2:1 (approximately 70:30ms = 10 Hz)
Inter-digit Pause** 800ms
To Next Page
Loading...
