Operation
7-352 Service Manual
HiPath 1100 applications
Maximal downstream rate: ______ kbps
2. ATM Interface:
1. VPI: _____
2. VCI: _____
3. Access Protocol
1. Access Protocol Type
[ ] RFC1483 Bridge
[ ] RFC1483 Routed
[ ] PPPoA
[ ] PPPoE
[ ] IpoA
[ ] Other:_____________________
4. IP Services
1. Fixed DHCP provider IP (for RFC1483 Router)
[ . . . ]
2. Fixed DNS provider IP (for RFC1483 Router)
[ . . . ]
5. Special requirements
_____________________________________________________________________
_____________________________________________________________________
7.4.4.8 Siemens Admin Console
This is an administrative program for programming an ADSL module.
The modules can be configured by accessing their IP number (Default = 192.168.254.253)
from your web browser http://192.168.254.253(Microsoft Internet Explorer or Netscape
Navigator, V. 5.0 higher).
The Siemens Admin Console provides a series of "tabs" in which you can check or change
settings.
General Information:
– Default IP of the modem: 192.168.254.254
To Next Page
Loading...
