Siemens HiPath 1120 - Hipath1150;1190;1190 R

Service Manual
3-67
Modules
Expansion modules (EB)
3.5.3.2 HiPath1150/1190/1190R
Figure 3-11 Module S
0
HiPath1150/1190/1190R
The Figure 3-11 features a 5-Port S
0
, also available as a 2-Port option.
Table 3-13 Module S
0
HiPath1150/1190/1190Rjumpers
Connector assignments
Table 3-14 S
0
module Connectors for HiPath1150/1190/1190R
Jumpers
Port 1
X10 and X11
Port 2
X50 and X51
Port 3
X90 and X91
Port 4
X130 and X131
Port 5
X170 and X171
Slot 1 and 2 - without RT (resistive termination) (factory default)
Slot 3 and 2 - with RT (resistive termination used when the port is configured as S
0
-BUS)
X1 Connector Port 1
X2
Connector
Port 2
X3
Connector
Port 3
X4
Connector
Port 4
X5
Connector
Port 5
X6
Connector
Connection of the MB to
the pin Connector RJ 45 RJ 45 RJ 45 RJ 45 RJ 45
X1