Service Manual
7-319
Operation
Driver Installation
Figure 7-39 Windows 98 SE - MSN Number
10. The installation of the USB drivers is now complete. CAPI applications installation will now
start automatically (see “CAPI Application setup” on page 7-331).
Windows ME
1. Connect the HiPath 1100 system to the computer
2. The Add New Hardware wizard will appear. A message will appear indicating that Setup
will search for new Composite USB device drivers. Click "Next" to proceed.
3. Choose "Specify the location of the driver (Advanced)" and click "Next." Click "Next" to
proceed.
To Next Page
Loading...
