Siemens HiPath 1120 - Figure 7-76 LCR Module - Creating Tables

Service Manual
7-357
Operation
HiPath 1100 applications
Figure 7-76 LCR module - creating tables
1. In Destination, click in the rectangle to edit the name of the rule;
2. In Code, click in the rectangle to edit the code (local area or destination code);
3. In Type, select Local, National or International;
1. In the National prefix, the same prefix from “Advanced/System configuration/
Regional configuration” will be added;
2. In the International prefix, the same prefix from “Advanced/System configuration/
Regional configuration” will be added;
4. In Trunk group, select the the group of outgoing trunks for the calls;
5. In Carrier, click in the rectangle to edit the name of the Carrier;
6. In Number, click in the rectangle to edit the number of the Carrier;