Siemens HiPath 1120 - Figure 7-55 Windows XP - ISDN; Figure 7-56 Windows XP - MSN

Operation
7-330 Service Manual
Driver Installation
4. Once this is completed, the installation of the optiPoint driver will start A message will
appear (three times) to the effect that the software installation did not pass the Windows
logo test. Click "Continue" every time this message will appear.
5. In the ISDN - optiPoint window, select “European ISDN (DSS1)“ then click “Next”
Figure 7-55 Windows XP - ISDN
6. Enter the MSN-CAPI number (see Table 6-3 on page 6-206) (valid extension range is X-Y)
in "Add," in the Multi-subscriber Numbers" box.
Figure 7-56 Windows XP - MSN