Siemens HiPath 1120 - Main Configurations

Configuring the system specifically for the client
6-208 Service Manual
Table of the System’s Programming Codes
6.2.1 Main Configurations
Programmed
Functions
Code Intermediate data Data to
Program
Completing
data entry
Default
Default Access to a
group of external
Lines
002 extension Group of external lines # instead of
extension
0
Special Class of
Service for a
Blocked Extension
096 extension COS - 0 (No Permission)
COS-1 (Denied List 1)
COS-2 (Denied List 2)
COS-3 (Denied List 3)
COS-4 (Permission List 1 )
COS-5 (Permission List 2)
COS-6 (Permission List 3)
COS-7 (Default for all lines)
# instead of
extension
0
COS assignment 111 group of external lines
Day COS
class - 0 (No Permission)
Class - 1 (Denied List 1)
Class - 2 (Denied List 2)
Class - 3 (Denied List 3)
Class - 4 (Permission List 1)
Class - 5 (Permission List 2)
Class - 6 (Permission List 3)
Class - 7 (default for all lines)
Night service COS:
Class - 1 (Denied List 1)
Class - 2 (Denied List 2)
Class - 3 (Denied List 3)
Class - 4 (Permission List 1)
Class - 5 (Permission List 2)
Class - 6 (Permission List 3)
Class - 7 (Default for all lines)
extension # instead of
extension
Class - 77 for
all exten-
sions.
Note:
Class - 7 Day
Class - 7
Night
Phonebook 112 Phonebook entry:
000 to 249
*
Number (up to 20 digits) 5-second time-
out
All entries are
blank
Dialing Mode on an
external Analog
Line
119 external analog line 1 - Analog line: Pulse (DP)
2 - Analog line: Multifre-
quency (MF)
# instead of
external line
2 - MF
Denied List 123 Class of Service: 1, 2 or 3 +
List 1 - COS 1 - slots 01 to 10
List 2 - COS 2 - slots 01 to 25
List 3 - COS 3 - slots 01 to 35
Number (up to 16 digits) 5-second time-
out
See
Table 6-8 on
page 6-218
Permission List 124 Class of Service: 4, 5 or 6 +
List 1- COS 4 - slots 01 to 10
List 2 - COS 5 - slots 01 to 25
List 3 - COS 6 - slots 01 to 25
Number (up to 16 digits) 5-second time-
out