Service Manual
6-209
Configuring the system specifically for the client
Table of the System’s Programming Codes
Table 6-5 Main Configurations
Analog Line Atten-
dants
142 External line
+
1 - Day service
2 - Night service
3 - Day service after a specified
time period
4 - Night service after a specified
time
Up to 10 extensions or call
groups or
∗ - to delete
# instead of
extension
None
Attendant Console 150 extension or
∗ - to delete
# instead of
extension
None
Permission for
using Speed Dial
numbers without
COS analysis
072
∗ - to enable
# - to disable
Automatic # - to disable
Language 164 0 - Custom
1 - Portuguese
2 - Spanish
3 - English
4 - French
5 - Italian
6 - Turkish
Automatic 3
Country/Group of
Countries
165 See Table 6-16 on page 6-
226
Automatic 01 - Brazil
COS changeover 178 extension
∗ - to enable
# - to disable
# instead of
extension
# - disabled
Carrier selection
mode: LCR or
ACS
**
225 ∗ - ACS
# - LCR
Automatic # - LCR
Warning Tone for
Calls without LCR
092
∗ - To activate
# - to deactivate
Automatic # - to deacti-
vate
To activate the
time for LCR fall-
back
250 Group of external lines
∗ - To activate
# - to deactivate
# instead of
extension
# - to deacti-
vate
Time for LCR fall-
back
251 05 to 30 seconds Automatic 05 seconds
* To dial an external number enter the external line number instead of the external access code "0."
** Settings must be configured on the HiPath 1100 Manager.
Programmed
Functions
Code Intermediate data Data to
Program
Completing
data entry
Default
To Next Page
Loading...
