Siemens HiPath 1120 Service Manual

Configuring the system specifically for the client
6-222 Service Manual
Table of the System’s Programming Codes
6.2.6 Updating the Software
Table 6-12 Updating the Software
6.2.7 Remote Administration
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
SW Information 001 ∗ - Displays the software release,
version number, product name,
APS, and serial number.
Press any key
to finalize
entry.
Local SW Update 060 Automatic
Activating a SW
Update
055
∗ - to enable
# - to disable
Automatic # - to disable
Day for SW Update 054 dd (day, from 01 to 31) or Automatic 01
Time for SW
Update
058 hh:mm (hh from 00 to 23
and mm from 00 to 59)
Automatic 00:00
External number
for updating the
software
056 Number (up to 20 digits) # instead of
the digit or
Automatic
None
Frequency of SW
update
057 Month (01 to 12) Automatic 01
Uploading the SW
update
059 hh:mm (hh from 00 to 23
and mm from 00 to 59)
Automatic 00:00
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
Service Call *994 Number of Service Center # - to confirm Automatic
Remote Software
Update
*9415 Automatic
Remote Operation
Mode
084 1 - Via ISDN
2 - Via modem
Automatic 1 - Via ISDN
Activating remote
administration
066
∗ - to enable
# - to disable
Automatic # - to disable
External number
configuration
067 Position: 1 to 4 Number (up to 20 digits) # instead of
slot position
None
Remote adminis-
tration password
068 Position: 1 to 4 00000 to 99999 # instead of
slot position
None
Remote MSN 069 Position: 001 to 140 or
∗ - to delete
Automatic None

Siemens HiPath 1120 Specifications

General

Brand	Siemens
Model	HiPath 1120
Category	Telephone
Language	English