Siemens HiPath 1120 - Call Detail Report Manager; Internal Entrance Telephone

Service Manual
6-223
Configuring the system specifically for the client
Table of the System’s Programming Codes
Table 6-13 Remote administration
6.2.8 Internal entrance telephone
Table 6-14 Internal entrance telephone
6.2.9 Call Detail Report Manager
Without MSN Veri-
fication
070 ∗ - to enable
# - to disable
Automatic # - to disable
Remote adminis-
tration via DTMF
157 ∗ - to enable
# - to disable
Automatic ∗ - to enable
Ending remote
administration
196 Automatic
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
Configuring an
internal entrance
telephone
115 Position: 1 to 20 Extension or
∗ - to delete
# instead of
slot position
# - No
Door lock 116 Position: 1 to 20 ∗ - to enable
# - to disable
# instead of
slot position
# - to disable
DIDs for entrance
telephones
159 Position: 1 to 20
+
1 - Day service
2 - Night service
Extension 1 +
∗ Extension
2 (up to 10 Extensions) or
∗ - to delete
# instead of
extension
Extension
11/101
Permission for
opening door
125 Position: 1 to 20 Extension +
∗ or
∗ - to delete
# instead of
extension
All exten-
sions
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default
Call detail report
with a serial inter-
face
006 ∗ - to enable
# - to disable
Automatic # - to disable
Ticket cost code
ticket
095
∗ - to enable
# - to disable
Automatic # - to disable
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default