Service Manual
7-367
Operation
HiPath 1100 applications
Examples:
1. Internal call from Extension 16 to the VMIe Group: ***1***16*1
2. Direct internal call from Extension 15 to Extension 11, forwarded to the VMIe Group (*11):
***3****15****11*1
3. Direct internal call from Extension 11 to Extension 15, forwarded to the VMIe Group
configured as second Attendant. ***4****11****15*1
4. Incoming call over an external analog line to Extension 11, forwarded (*11) to the VMIe
Group: ***3**********11*3
5. Incoming call over a digital line to Extension 11, forwarded (*11) to the VMIe Group:
***3**********11*4
6. Incoming call over an external analog line to Extension 12 which is forwarded to the VMIe
Group configured as Second Attendant: ***4**********12*3
7. Incoming call over a digital line to Extension 12, forwarded to the VMIe Group configured
as second Attendant. ***4**********12*4
8. Direct internal call from Extension 1015 to Extension 1011, forwarded to the VMIe Group
(*11): ***3**1015**1011*1
9. Direct internal call from Extension 10015 to Extension 10011, forwarded to the VMIe Group
configured as second Attendant. ***4*10015*10011*1.
Voice Mail Protocol for the system:
The Voice Mail indicates when there is a message waiting at an extension’s mailbox using a
DTMF service code (*68) followed by the extension number. When a message is erased, a
different DTMF code (#68) is used to deactivate the signal at the extension that belongs to the
VMIe Group. In addition, these codes can be re-programmed if they are not supported by the
Voice mail system. Please check the items "Deactivating the Internal MWI #68" and "Activating
the Internal MWI Internal *68" in the HiPath 1100 Manager "System Settings - Service Code"
folder.
Example:
1. The Voice mail system indicates that Extension 13 has a message waiting in mailbox :
*6813
2. The Voice mail system indicates that the mailbox for extension 12 is empty: #6812.
To Next Page
Loading...
