Siemens SINUMERIK 828D

respect to the PLC by clearing DB19.DBB10. From this point in time, the PLC user program
can specify a new hard key. In parallel, the actual hard key request is processed in the
operating software.
Example
Configuration file:
; PLC hard keys (KEY50-KEY254)
[keyconfiguration]
KEY50.0 = name := AreaMachine, dialog := SlMachine
KEY51.0 = name := AreaParameter, dialog := SlParameter
KEY52.0 = name := AreaProgramEdit, dialog := SlProgramEdit
KEY53.0 = name := AreaProgramManager, dialog := SlPmDialog
KEY54.0 = name := AreaDiagnosis, dialog := SlDgDialog
KEY55.0 = name := AreaStartup, dialog := SlSuDialog
KEY56.0 = name := Custom, dialog := SlEsCustomDialog
The area and dialog identifiers can be found in the systemconfiguration.ini from
[System
Siemens directory] /cfg.
Dialog selection
9.2 Dialog selection using PLC hard keys
SINUMERIK Integrate Run MyScreens
196 Programming Manual, 10/2015, 6FC5397-3DP40-5BA3