3. Select "Next step" >. To configure the motor, select "Select standard Siemens motor from
the list":
First select the
motor type. In order to restrict the list for selecting the motors, enter text in
the "Search" field which works as a filter. The character * is used as a wildcard. The text
works for all column contents in the list except for units and connection type.
4. Select "Next step" >. "Bearing version" is only listed if this motor is available with different
bearing versions.
You can select the bearing type here: This limits the speed to the maximum speed of the
bearing in order to prevent mechanical destruction. When selecting "No specification" the
maximum speed of the bearing is not monitored.
Commissioning the drive
5.1 Commissioning the drive
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 101
To Next Page
Loading...
