Siemens SINUMERIK 828D

End acknowledgment
Acknowledg‐
ment step
Acknowledgment
bit
Transfer step for the
new tool
Transfer step for the
old tool
Status
xxx DB4200.DBXx.x 0 0 1
The step New tool from gripper 1 to spindle can be omitted and replaced by a total
acknowledgment. This also informs the tool management that all tools are in their target
positions.
Acknowledg‐
ment step
Acknowledgment
bit
Transfer step for the
new tool
Transfer step for the
old tool
Status
DB4200.DBX0.0 (99)
Tool management
9.6 Example: Change manual tools
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 303