Siemens SINUMERIK 828D Commissioning Manual

Default storage locations:
● Current topology (.xml or .csv):
The following storage locations are offered depending on the configuration:
– Network topology (storage location: HMI data / data backups / network topology)
– User CF
–
Network drives
– USB
In CSV format, ";" is preset as a separator; it can be changed in sldgconfig.xml
● Reference topology:
/user/common/tcu/$soll/$soll.xml
● Manufacturer topology:
/user/common/tcu/$soll/$oem_soll.xml
Configuring the network
4.4 Station-related network diagnostics
SINUMERIK Operate
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 47

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash