Siemens SINUMERIK 828D Commissioning Manual

6. To establish a simple connection without security, make the following settings. Enter the
administrator user assigned when OPC UA was set up and his password by pressing "..."
for "User Identity". Then confirm the settings with "OK".
Figure 3-4 Server configuration
Figure 3-5 User Identity
Testing the connection
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3 17

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash