Silicon Graphics O2+ - Page 11

Figures
007-4486-001 xi
Figure 2-36 Releasing the PCI Tray. . . . . . . . . . . . . . 57
Figure 2-37 Removing the PCI Tray . . . . . . . . . . . . . 58
Figure 2-38 Removing the Screws from the Faceplate . . . . . . . . 59
Figure 2-39 Removing the Faceplate from the System Module . . . . . . 59
Figure 2-40 Removing the PCI Tray from the R12000class System Module . . 60
Figure 2-41 Returning the Lever to Its Starting Position . . . . . . . . 61
Figure 2-42 Replacing the PCI Tray in the System Module . . . . . . . 62
Figure 2-43 PCI Tray Seated Correctly . . . . . . . . . . . . . 63
Figure 2-44 Replacing the R12000class PCI Tray in the System Module . . . 64
Figure 2-45 Replacing the Faceplate . . . . . . . . . . . . . 65
Figure 2-46 Replacing Two Screws on the Faceplate . . . . . . . . . 65
Figure 2-47 Replacing Five Screws on the Faceplate . . . . . . . . . 66
Figure 2-48 Attaching the Wrist Strap . . . . . . . . . . . . . 67
Figure 2-49 Removing the Option Board . . . . . . . . . . . . 68
Figure 2-50 Returning the System Module to Its Upright Position . . . . . 69
Figure 2-51 Reinstalling the System Module in the Chassis . . . . . . . 70
Figure 2-52 Securing the System Module in Place . . . . . . . . . 71
Figure 2-53 Connecting the Power Cable . . . . . . . . . . . . 72
Figure 2-54 Turning On the Workstation . . . . . . . . . . . . 73
Figure 2-55 The Toolchest . . . . . . . . . . . . . . . . 73
Figure 3-1 Turning Off the Workstation . . . . . . . . . . . . 76
Figure 3-2 Locating the Optional Drive Bay . . . . . . . . . . . 77
Figure 3-3 Disconnecting the Power Cable and Other Cables . . . . . . 78
Figure 3-4 Releasing the Audio-visual Module . . . . . . . . . . 79
Figure 3-5 Sliding Out the Audio-visual Module . . . . . . . . . 80
Figure 3-6 Removing the Panel from the Optional Drive bay . . . . . . 81
Figure 3-7 Installing the Second Hard Drive Module . . . . . . . . 82
Figure 3-8 Securing the Second Hard Drive Module . . . . . . . . 83
Figure 3-9 Reinstalling the Audio-visual Module in the Chassis . . . . . 84
Figure 3-10 Securing the Audio-visual Module . . . . . . . . . . 85
Figure 3-11 Connecting the Power Cable and Other Cables. . . . . . . 86
Figure 3-12 Turning On the Workstation . . . . . . . . . . . . 86
Figure 3-13 Turning Off the Workstation . . . . . . . . . . . . 87