Silicon Graphics O2+ - 3 Installing or Removing Peripherals; Installing a Second Internal Hard Drive in an Rm7000 Class Workstation

007-4486-001 75
Chapter 3
3. Installing or Removing Peripherals
This chapter tells you how to install or remove a second hard disk drive in your O2+
workstation and how to connect external peripherals. The following topics are covered:
• “Installing a Second Internal Hard Drive in an RM7000class Workstation”
• “Removing the Second Internal Hard Drive in an RM7000class workstation”
• “Connecting External SCSI Devices”
• “Connecting Serial Devices”
• “Connecting Audio and Video Devices”
Installing a Second Internal Hard Drive in an RM7000class Workstation
Note: The optional drive bay is not available on O2+ R12000class workstations.
After you have installed the second hard disk, see “Setting Up a New Hard Disk” in the
online Personal System Administration Guide for information on how to manage your disk
space.