4-52 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Troubleshooting
Fan
1. Enter Service Diagnostics (page 4-11).
2. Use the Up and Down Arrow buttons to select Printer > IOT Diag > Digital
Output > DO-4.
When checking the Fan, stop the test within 10 seconds. Executing the
Fan test for 10 seconds or longer may cause damage to the Fan.
3. Check Fan rotation.
4. Press the Stop button to stop the test.
To Next Page
Loading...
Need help?
General