3.5 Items to Check before Starting Up the Drive
154 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
◆ Make the Initial Settings
The keypad will show the Initial Setup screen when energizing the drive for the first time. Users can set the date
and time or the language to show on the keypad. The Setup Wizard prepares the drive for operation, from setting
the basic parameters to performing Auto-Tuning. Refer to Set Parameters Using the Setup Wizard on page 181 for
more information.
Note:
If the keypad does not show the Initial Setup screen, [Initial Setup] from the Main Menu to show the Initial Setup screen.
1. Make the initial settings for each item.
A - Language Selection
B - Set Date/Time
C - Setup Wizard
D - Show Initial Setup Screen
Note:
If you select [Yes] from the [Show Initial Setup Screen] setting, the keypad will show the Initial Setup screen each time the
drive is energized.
If you select [NO], the keypad will not show the Initial Setup screen each time the drive is energized, starting with the next
time.
2. Push (Home).
The display shows the HOME screen.
To Next Page
Loading...
