Parameter List
10
10.4 A: Initialization Parameters
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual 501
No.
(Hex.)
Name Description
Default
(Range)
Ref.
A1-06
(0127)
Application Preset
Sets the drive to operate in selected application conditions.
0 : General-purpose
1 : Water Supply Pump 2
2 : Conveyor
3 : Exhaust Fan
4 : HVAC Fan
5 : Air Compressor
6 : Crane (Hoist)
7 : Crane (Traveling)
0
(0 - 7)
679
A1-07
(0128)
DriveWorksEZ
Function Selection
Sets the drive to operate with DriveWorksEZ.
0 : DWEZ Disabled
1 : DWEZ Enabled
2 : Enabled/Disabled wDigital Input
0
(0 - 2)
695
A1-11
(111D)
Expert
Firmware Update
Lock
This function locks the drive firmware. When enabled, users cannot
flash new drive firmware.
0 : Disabled
1 : Enabled
0
(0, 1)
695
A1-12
(1564)
Bluetooth ID
Sets the password necessary to use Bluetooth to control the drive
with a mobile device.
-
(0000 - 9999)
696
◆ A2: User Parameters
No.
(Hex.)
Name Description
Default
(Range)
Ref.
A2-01 to
A2-32
(0106 -
0125)
User Parameters 1
to 32
You can select a maximum of 32 parameters for the drive and set
them to parameters A2-01 to A2-32. The [User Parameters] section
of the keypad main menu shows the set parameters. You can
immediately access these set parameters.
Note:
Settings for A2-01 to A2-32 change when the A1-06 [Application
Preset] value changes.
Parameters in
General-Purpose
Setup Mode
(Determined by
A1-07)
696
A2-33
(0126)
User Parameter
Auto Selection
Sets the automatic save feature for changes to parameters A2-17 to
A2-32 [User Parameters 17 to 32].
0 : Disabled: Manual Entry Required
1 : Enabled: Auto Save Recent Parms
Determined by A1-
06
(0, 1)
696
To Next Page
Loading...
