YASKAWA GA700 - Automatic Parameter Settings Optimized for Specific Applications; Presets); Automatic Parameter Settings Optimized for Specific Applications (Application Presets)

3.7 Automatic Parameter Settings Optimized for Specific Applications (Application Presets)
190 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
3.7 Automatic Parameter Settings Optimized for Specific
Applications (Application Presets)
The drive has application presets to set the necessary parameters for different applications to their best values. Use
A1-06 from [User Custom Parameters] on the Main menu to check the parameters that were automatically
changed by the application preset function.
Note:
Make sure that you set A1-03 = 2220, 3330 [Initialize Parameters = 2-Wire Initialization, 3-Wire Initialization] to initialize parameters
before you set A1-06.
This section shows the procedure to set an application preset.
1. Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).
3. Push or to select [Parameters], then push .
4. Push or to select [A Initialization Parameters], then push .
5. Push or to select [A1 Initialization], then push .
6. Push or to select A1-06, then push .