YASKAWA GA700 - 11.11 O: Keypad-Related Settings; O1: Keypad Display Selection

11.11 o: Keypad-Related Settings
1010 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
11.11 o: Keypad-Related Settings
o parameters set keypad functions.
Note:
You cannot set the parameters in Table 11.76 with the optional LED keypad.
Table 11.76 Parameters that You Cannot Set with the LED Keypad
No. Name
o1-05 LCD Contrast Adjustment
o1-24 to o1-35 Custom Monitor 1 to 12
o1-36 LCD Backlight Brightness
o1-37 LCD Backlight ON/OFF Selection
o1-38 LCD Backlight Off-Delay
o1-39 Show Initial Setup Screen
o1-40 Home Screen Display Selection
o1-41 to o1-46 1st to 3rd Monitor Area Selections/Settings
o1-47 to o1-51 Trend Plot 1 or 2 Scale Settings
o1-55 to o1-56 Analog Gauge Area Selection/Setting
No. Name
o3-04 Select Backup/Restore Location
o3-05 Select Items to Backup/Restore
o3-06 Auto Parameter Backup Selection
o3-07 Auto Parameter Backup Interval
o4-22 Time Format
o4-23 Date Format
o5-01 Log Start/Stop Selection
o5-02 Log Sampling Interval
o5-03 to o5-12 Log Monitor Data 1 to 10
◆ o1: Keypad Display Selection
o1 parameters select the parameters shown on the initial keypad screen and to configure the parameter setting
units and display units. These parameters also adjust the backlight and contrast of the LCD display.
■ Home Screen Display Format
o1-40 [Home Screen Display Selection] changes the display of the monitor shown on the Home screen. You can
show numerical values or one of these three displays on the Home screen monitor:
Bar Graph Display
A - Select Ux-xx [Monitors] with o1-
24, o1-25, and o1-26.
B - Configure display regions with
o1-41, o1-43, and o1-45.
C - Select display ranges with o1-42,
o1-44, and o1-46.
Analog Gauge Display
A - Select Ux-xx [Monitors] with o1-
24.
B - Configure display regions with
o1-56.
C - Select display ranges with o1-55.