YASKAWA GA700 - Show the Standard Monitor

3.6 Keypad Operation
156 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
■ Show the Main Menu
Push to show the main menu. Push (HOME) to go back to the HOME screen.
◆ Show the Standard Monitor
This section shows how to show the standard monitor (Ux-xx).
1. Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).
3. Push or to select [Monitors], then push .
4. Push or to select [Standard Monitor], then push .
5. Push or to move the cursor to change the value .
6. Push or to change the monitor number to show the monitor item.