Parameter List
10
10.7 d: Reference Settings
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual 521
No.
(Hex.)
Name Description
Default
(Range)
Ref.
d1-16
(0291)
RUN
Reference 16
Sets the frequency reference in the units from o1-03 [Frequency
Display Unit Selection].
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
0.00 Hz
(0.00 - 590.00 Hz)
781
d1-17
(0292)
RUN
Jog Reference
Sets the JOG frequency reference in the units from o1-03
[Frequency Display Unit Selection]. Set H1-xx = 6 [MFDI Function
Select = Jog Reference Selection] to use the Jog frequency
reference.
Note:
o1-03 = 1 [0.01% (100% = E1-04)] when A1-02 = 6, 7 [Control
Method Selection = PM Advanced Open Loop Vector, PM Closed
Loop Vector].
6.00 Hz
(0.00 - 590.00 Hz)
781
◆ d2: Reference Limits
No.
(Hex.)
Name Description
Default
(Range)
Ref.
d2-01
(0289)
Frequency
Reference Upper
Limit
Sets maximum limit for all frequency references. This value is a
percentage of E1-04 [Maximum Output Frequency].
100.0%
(0.0 - 110.0%)
782
d2-02
(028A)
Frequency
Reference Lower
Limit
Sets minimum limit for all frequency references. This value is a
percentage of E1-04 [Maximum Output Frequency].
0.0%
(0.0 - 110.0%)
782
d2-03
(0293)
Analog Frequency
Ref Lower Limit
Sets the lower limit of the master frequency reference (Multi-Step
Speed 1) as a percentage of E1-04 [Maximum Output Frequency].
0.0%
(0.0 - 110.0%)
782
◆ d3: Jump Frequency
No.
(Hex.)
Name Description
Default
(Range)
Ref.
d3-01
(0294)
Jump Frequency 1
Sets the median value of the frequency band that the drive will
avoid.
0.0 Hz
(Determined by
A1-02)
783
d3-02
(0295)
Jump Frequency 2
Sets the median value of the frequency band that the drive will
avoid.
0.0 Hz
(Determined by
A1-02)
783
d3-03
(0296)
Jump Frequency 3
Sets the median value of the frequency band that the drive will
avoid.
0.0 Hz
(Determined by
A1-02)
783
d3-04
(0297)
Jump Frequency
Width
Sets the width of the frequency band that the drive will avoid.
1.0 Hz
(Determined by
A1-02)
784
To Next Page
Loading...
