2.10 Installation Methods
68 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
2.10 Installation Methods
The drive installation methods include standard installation and external heatsink installation.
◆ Standard Installation
Refer to Drive Exterior and Mounting Dimensions on page 465 for more information about external dimensions
and installation procedure.
◆ External Heatsink
Refer to Table 2.13 and Table 2.14 for the panel cut-out dimensions for external heatsink installations. An
attachment is necessary to install drive models smaller than 2082 (200 V class) and 4060 (400 V class) with the
heatsink outside of the panel.
Note:
• The exterior mounting dimensions and installation dimensions for a standard installation are different than the dimensions for an
external heatsink installation.
• The shaded parts of the panel cut-out dimensions are the gasket dimensions. Make sure that the gasket is not smaller than the specified
dimension.
To Next Page
Loading...
