11.8 H: Terminal Functions
910 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
A - H2-24
[Comparator 1 On-Delay Time]
B - H2-25
[Comparator 1 Off-Delay Time]
Figure 11.103 Comparator 1 Output Time Chart
Note:
The drive compares the monitors set with H2-20 as absolute values.
■ 67: Comparator2
Setting Function Description
67 Comparator2
The monitor value set with H2-26 [Comparator 2 Monitor Selection] is on while in range of the
time set with H2-30 [Comparator 2 On-Delay Time] and the values of H2-27 [Comparator 2
Lower Limit] and H2-28 [Comparator 2 Upper Limit] are in range.
A - H2-30
[Comparator 2 On-Delay Time]
B - H2-31
[Comparator 2 Off-Delay Time]
Figure 11.104 Comparator 2 Output Time Chart
Note:
The drive compares the monitors set with H2-26 as absolute values.
■ 69: External Power 24V Supply
Setting Function Description
69 External Power 24V
Supply
The terminal activates when there is an external 24V power supply between terminals PS-AC.
ON : An external 24V power supply supplies power.
OFF : An external 24V power supply does not supply power.
■ 6A: Data Logger Error
Setting Function Description
6A Data Logger Error
The terminal activates when the drive detects a LoG [Com Error / Abnormal SD card].
To Next Page
Loading...
