10-37
IM 701450-01E
10
Analyzing and Searching Waveforms
Measuring Waveforms Using Marker Cursors
1. Press CURSOR. The CURSOR menu appears.
Selecting the Marker Cursor
2. Press the Type soft key. The Type menu appears.
3. Press the Marker soft key.
When X-Y waveforms
are not displayed
When X-Y waveforms
are displayed
Selecting the Waveform to Be Measured
When X-Y Waveforms Are Not Displayed
4. Press the Select soft key to select the marker from M1 to M4.
5. Press the Trace soft key. The Trace menu appears.
6. Press the CH1 to CH8/4, Math1, or Math2 soft key to select the waveform to be
measured.
• On the DL7440, select CH1 to CH4, Math1, or Math2.
• On the DL7480, select CH1 to CH8, Math1, or Math2. CH7, CH8, Math1, and Math2
appear when you press the To Page 2 soft key.
When X-Y Waveforms Are Displayed
4. Press the Trace soft key to select XY1 or XY2.
Proceed to step 7.
Trace menu on the DL7480
When X-Y waveforms are not displayed When X-Y waveforms
are displayed
10.5 Making Cursor Measurements
To Next Page
Loading...
