10-48 IM 701450-01E
Turning ON/OFF 1 Cycle Mode
19. Press the 1Cycle Mode soft key to select ON or OFF.
Setting the Measurement Range
20. Press the Time Range1/Time Range2 soft key to set the jog shuttle control to
Time Range1, Time Range2, or both Time Range1 and Time Range 2.
• If you select Time Range1, you can move Time Range1.
• If you select Time Range2, you can move Time Range2.
• If you select both Time Range1 and Time Range2, you can move Time Range1 and
Time Range2 horizontally without changing the spacing between the two. The value of
the digit being specified by Time Range1 changes.
21. Turn the jog shuttle to set the measurement range.
Setting Distal, Mesial, and Proximal Values
22. Press the Next (1/2) soft key. The page 2 menu appears.
Selecting the Waveform to Be Set
23. Press the Trace soft key. The Trace menu appears.
24. Press the CH1 to CH8/4, Math1, or Math2 soft key to select the waveform to be
set.
• On the DL7440, select CH1 to CH4, Math1, or Math2.
• On the DL7480, select CH1 to CH8, Math1, or Math2. CH7, CH8, Math1, and Math2
appear when you press the To Page 2 soft key.
Trace menu on the DL7480
10.6 Automated Measurement of Waveform Parameters
To Next Page
Loading...
