YOKOGAWA DL7440 User Manual

10-57
IM 701450-01E
10
Analyzing and Searching Waveforms
Searching the Maximum or Minimum Values of the Four Measurement Parameters
Being Displayed
12. Press the Max/Min Item1 soft key. The measured values of the 1
st
measurement parameter from the left of the list are searched, and the cursor
(highlight) moves to the measured value with the maximum or minimum mark (↑
or ↓).
13. Press the Max/Min Item2 soft key. The measured values of the 2
nd
measurement parameter from the left of the list are searched, and the cursor
moves to the measured value with the maximum or minimum mark (↑ or ↓).
14. Likewise, press the Max/Min Item3 and Max/Min Item4 soft keys. The cursor
moves to the corresponding measured values.
The cursor does not move if there is no maximum or minimum value.
Item1 Item2 Item3 Item4
Mark indicating the minimum value
Mark indicating the maximum value
Sorting the Measured Values in Ascending or Descending Order
15. Press the Sort soft key to select FWD or REV.
If FWD is selected, the measured values are sorted
in ascending order (left to right on the screen).
If REV is selected, the measured values are sorted
in descending order (right to left on the screen).
10.7 Performing Statistical Processing of the Measured Values of Waveform Parameters

YOKOGAWA DL7440 Specifications

General

Brand	YOKOGAWA
Model	DL7440
Category	Test Equipment
Language	English