12-17
IM 701450-01E
12
Saving and Loading Data
Loading the Setup Data
4. Press the Load soft key. The Load menu and the File List window appear.
Selecting the Load Source Medium/Directory
5. The procedure is the same as steps 6 and 7 on page 12-15.
Selecting the File to Be Loaded
6. Turn jog shuttle to select a file.
Executing the Load Operation
7. Press the Load Exec soft key. The selected file is read from the directory
indicated in Path=...... At the same time, the Load Exec soft key changes to the
Abort soft key.
Aborting the Load Operation
8. Press the Abort soft key. The load operation is aborted. At the same time, the
Abort soft key changes to a Load Exec soft key.
Specifying the File to Be Displayed in the File List Window and Viewing File
Properties
9. The procedure is the same as steps 14 to 16 on page 12-16.
12.7 Saving/Loading the Setup Data
To Next Page
Loading...
Need help?
General
