12-45
IM 701450-01E
12
Saving and Loading Data
Explanation
Selecting the Storage Medium and Directory
Storage media to and from which saving and loading are possible are displayed on the
File List window.
Display Examples of Storage Media
FD Floppy disk
ZIP Zip disk
PC_Card PC card
SCSI5 SCSI device with the ID number set to 5*
SCSI5-1 Partition 1 of a SCSI device whose ID number is 1*
NetWork Network drive (when the Ethernet interface option is installed)
USB USB storage
* When a SCSI device whose ID number is 5 is connected
Selecting the File Attribute (Excluding Net Drive)
Select the file attribute of each file from the following.
R/W
Read and write possible.
R
Read only. Cannot write to the file or delete the file.
Selecting the Files to Be Deleted
You can delete all files that have an asterisk to the left of the file name. There are two
methods in selecting the files to be deleted.
Selecting the files one at a time
Press the Set/Reset soft key to place ∗ marks to the left of the files one at a time.
Selecting the files at once
Places an asterisk to the left of all the file names selected collectively using the All Set soft
key.
Selecting a file or directory and pressing the All Set soft key places an asterisk on every
file in the directory containing the selected file or directory.
Specifying the File to Be Displayed on the File List Window
Specify the type of files to be displayed.
∗.extension
Displays only the data file that was selected in the File Item setup menu and the data type
menu.
∗.∗
Displays all the files in the directory.
12.14 Changing the File Attributes and Deleting Files
To Next Page
Loading...
Need help?
General
