7 Using Time Capture
To prepare for filling the capture buffer 7-2
To allocate memory for the capture buffer 7-4
To fill the capture buffer 7-5
To save the capture buffer on a flexible disk 7-6
To recall a capture buffer from a flexible disk 7-7
To examine the capture buffer 7-8
To define an analysis region 7-9
To prepare for measuring from the capture buffer 7-10
To measure from the capture buffer 7-12
Part II Working with the Display
8 Displaying Measurement Data
To select the active trace 8-2
To display measurement data—one channel, one trace 8-3
To display measurement data—one channel, multiple traces 8-4
To display measurement data—multiple channels, multiple traces 8-5
To display a data register 8-6
To display a math function 8-7
9 Formatting the Display
To arrange traces on the screen 9-2
To enable global screen elements 9-3
To enable trace-specific screen elements 9-4
To enter your own trace title 9-5
To control the screen 9-6
To set up a waterfall display 9-7
To enhance a waterfall display 9-8
To display the waterfall buffer 9-9
To display one trace from the waterfall buffer 9-10
To display a slice through the waterfall buffer 9-11
To Next Page
Loading...
